How to Fix Error 0x80070057: The Parameter is Incorrect on Windows 10

Error Code 0x80070057 is a well known Windows error and is of a dignified vintage. This error exists since Windows 7, and now Windows 10 users also face it. If you have reached to this post, that means you must be facing 0x80070057, or “Error Code 0x80070057: The parameter is incorrect.” or “An Internal Error has occurred wrong parameter.” Whatever the error code be, remember you are dealing with same 0x80070057 Windows malfunction code.

The parameter is incorrect 0x80070057 error occurs when you try to install Windows or take a full backup of your Windows. The primary source of this error code is bulky registry values, that creates an immediate need for large virtual memory space.

Besides this, due to incompatibility between the motherboard and drivers, you can encounter Error Code 0x80070057.

Don’t worry, fixing this error is not at all difficult. In this article, we will show how to take care of error 0x80070057 the parameter is incorrect.

Looking for different BSOD Windows error code such as or 0x000000f4, 0x0000003b BSOD stop code? We may have it covered!

Why Error 0x80070057 Occurs?

Depending on the operation you are performing, Error 0x80070057 varies. This means if there’s an issue in Windows update you may face, “0x80070057 the parameter is incorrect”, “Unknown error,” “parameter is incorrect,” or simply “error 0x80070057.” Likewise, it may occur in the following situations:

• While trying to take a backup of corrupt files
• Windows updates you are trying to install or System Reserved Partition is corrupt
• Corrupt registry
• RAM failure
• Damaged hard drive or file system error

How to Fix “The parameter is incorrect 0x80070057” on Windows 10

“The parameter is incorrect” error usually occurs, when there’s a problem with the disk. To fix it, follow the steps below:

Method 1: Run CHKDSK and repair disk errors

CHKDSK is Windows inbuilt tool to check and repair system errors or bad sectors on the hard disk. To run it and resolve “the parameter is incorrect 0x80070057” follow the steps below:

Note: If you receive an “error 0x80070057 the parameter is incorrect” message when using an external drive, USB you will need to connect it before running the CHKDSK command.

1. Plugin external driver, USB.
2. Type Command Prompt in the Windows search bar.
3. Right-click Command Prompt and select Run as Administrator from the context menu.
4. Next in Command Prompt window, type chkdsk E: /f /x /r

Note: E is the drive letter for the connected external drive. You’ll need to change it with the drive letter of your drive.

This command will direct CHKDSK to check and repair file system corruptions, errors, bad sectors, etc. Once finished, exit Command Prompt and reconnect the drive. You should now be able to access the drive without facing the parameter is incorrect 0x80070057 error.

Method 2: Run SFC scan now

The other reason for 0x80070057 error message is corrupt or missing system files. To resolve the problem, you can use System File Checker a.k.a. SFC to fix wrong system files.

1. Type Command Prompt in the Windows search bar.
2. Right-click Command Prompt, and select Run as Administrator from the context menu.
3. In the Command Prompt window type SFC/scannow, and press Enter.

System File Checker will now look for corrupt system files and will fix it. Exit Command Prompt when the process is finished and see if 0x80070057 the parameter is incorrect problem is fixed or not.

Method 3: Rename the SoftwareDistribution Folder

If you encounter parameter is an incorrect problem while updating Windows, you can try renaming SoftwareDistribution Folder. To do so, follow the steps below:

1. Press Windows key + R.
2. Next, in Run dialogue, type %SystemRoot% and press Enter.
3. Here, look for SoftwareDistribution folder. Rename it to SoftwareDistributon.old.
4. Restart your Windows 10, and try to update it.

You should not face parameter is incorrect error. However, if this does not work, either you will have to follow other ways as explained below.

Method 4: Make Changes to Windows Registry

1. Press Windows key + R.
2. Next, in Run dialogue, type regedit and press Enter.
3. Go to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsUpdate\UX

4. In right pane look for, IsConvergedUpdateStackEnabled. Double click on it to change the value data from, 1 to 0.

5. Next under UX click Settings.

6. From the right pane look for, right pane look for, UxOption. Double click on it to change the value data from, 1 to 0.

Ensure you are making changes to the correct registry value. Once the changes if required are done, reboot your system and try to update Windows. You should not face error 0x80070057 the parameter is incorrect.

Furthermore, if you are facing An internal error has occurred: The parameter is incorrect: (0x80070057) error during backup, follow the steps.

1. Press Windows key + R.
2. Next in Run dialogue, type regedit and press Enter.
3. Here look for: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates registry key.

4. Right-click SystemCertificates, and select New > DWORD (32-bit) Value. Name it as CopyFileBufferedSynchronousIo, and set the Value to 1.

5. Press OK, and exit the Registry Editor.

Restart your Windows, your backup should now complete without the parameter is incorrect 0x80070057 error.

Method 5: Use DISM

Use Deployment Image & Serving Management (DISM) command to download and restore the systems file health. To do so, follow the steps below:

1. Type Command Prompt in the Windows search bar.
2. Right-click Command Prompt, and select Run as Administrator from the context menu.
3. In the Command Prompt window, type DISM /Online /Cleanup-Image /RestoreHealth, and press Enter.

Let it complete, do not close Command Prompt while the command is running. If the process appears to hand just wait for a while, it will continue. One finished restart your computer, and again run sfc/scannow command.

This should fix error 0x80070057 the parameter is incorrect on Windows 10.

Looking for a Simple Solution to fix 0x80070057 the parameter is incorrect

If all this seems too technical, you can try using Advanced System Optimizer. It is a system optimization utility that can run all these commands on its own and fix such issues in no time. Moreover, using Advanced System Optimizer, you can clean junk files, delete duplicates, get rid of privacy exposing traces, fix registry errors and a lot more. If you want to give it a try.

I hope using either of the methods, you will be able to fix 0x80070057. Do leave us a comment to tell which method worked for you.