Fix Undoing Changes Made To Your Computer In Windows 10

To run Windows operating systems without any errors updating it to the latest version is recommended. But when getting these updates installed becomes a task then?

We understand it is frustrating; hence, in the guide below, we will discuss how to fix we couldn’t complete the updates/undoing changes made to your computer.

Usually, after downloading the updates and restarting the PC Windows 10 users complain about screen freeze and we couldn’t complete the updates undoing changes error message.

To resolve this, many users force, restart the system and end up getting stuck in the restart loop. Therefore, to fix this problem, we need precise solutions, and this is what we will discuss here.

Must Read: Best System Cleaner

But before that we will like to discuss some common Windows update error messages:

1. We couldn’t complete the updates undoing changes won’t turn off your computer – this occurs when Windows updates fail to install.

2. We couldn’t finish installing updates Windows 10 – occurs when Windows cannot finish installing updates

3. Failure configuring Windows updates undoing changes don’t turn off your computer – this makes Windows run in a loop as updates are not configured.

4. Windows 10 undoing changes stuck – when the installation of a certain update fails this stop code error occurs.

Now that the reason for different Windows updates is apparent let’s move further and learn the solution to fix Windows 10 undoing changes made to your computer.

Short on Time? Looking for a Quick Fix?

Well, here it is. You can try using Advanced System Optimizer – the best Free PC Optimizer.

To download it click here.

This popular PC cleaner helps fix the common reasons responsible for the error message “Undoing changes made to your computer”.

You can use it to clean junk files, check the disk for errors, optimize hard disk to fix bad sector, update outdated drivers, invalid registry entries, and more. This top PC optimizer offers a 25+ system tweaking tool that no other PC cleaner offers. Also, it is very simple to use. To automate the process you can set Schedule and run it automatically. To know more about the tool click here.

How to fix Undoing Changes Made to Your Computer – Windows 10

There are different solutions to fix this problem, so, try them one by one and see which one works for you.

1. Booting Windows into Safe Mode

  1. Altogether press and hold Shift + F8 or F8 key when the system restarts.
  2. This will load the advanced startup screen with different options
  3. Click Options > Troubleshoot > Advanced options > Startup Settings > Enable Safe Mode.

To learn in detail about Safe Mode, read our article on How to boot in Safe Mode.

2. Delete Latest Updates

Now that you are running Windows into Safe Mode, you need to delete freshly installed updates as it might be creating problems. To do so, follow the steps below:

1. Type Control Panel in Windows search and press Enter key.

2. Click Programs/ Programs & Features > View installed updates.

 

undoing changes made to your computer

 

3. This will open a new window with the list of all Windows updates. Select the most recent one to uninstall > hit the Uninstall button.

 

we couldn t complete the updates

 

4. Now restart Windows 10 in normal mode.

You should no longer face problems if we couldn’t complete the updates error message.

3. Run DISM

DISM (Windows Deployment Image Servicing and Management) is a built-in Windows tool. It helps resolve various Windows issues. Hence to fix undoing changes made to your computer we will use it.

To run the DISM command, follow the steps below:

1. Type Command Prompt in Windows search.

2. Select the search result then click Run as administrator from the right pane.

 

windows 10 undoing changes made to your computer

 

3. Here type following command: DISM.exe/Online /Cleanup-image /Restorehealth

4. In case you face any problem, try using an installation DVD or USB. Once connected type following command in Command Prompt running as admin:

DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess

Note: C: RepairSourceWindows should be replaced with the USB or DVD path.

  1. Wait for the operation to complete.
  2. Exit Command Prompt.

This should fix we Couldn’t Complete the Updates/Undoing Changes PC error message.

4. Run the SFC scan

When dealing with Windows update error messages running sfcscannow helps. To use this command, follow the steps below:

  1. Command Prompt > Run as administrator.
  2. Type SFC/scannow and press Enter key.
  3. Let the process finish. This will fix all corrupt system files.
  4. Now, restart your system and check if computer error with stop code Windows 10 undoing changes is resolved or not.

5. Use Windows Update Troubleshooter

Windows 10 offers a fantastic feature to troubleshoot most Windows error messages. Placed under Settings, the troubleshooter helps fix issues.

To use it, follow the steps below:

1. Windows Settings > Update & Security > Troubleshoot > Windows Update > Run the troubleshooter.

 

windows 10 undoing changes

 

2. Follow on-screen instructions and wait for the process to finish.

3. Restart the computer. This should fix undoing changes made to your computer on Windows 10

6. Block Windows Automatic Updates

Indeed, there’s no way to block Windows updates as you will have to update Windows sooner or later.

Therefore, instead of trying to block Windows updates, we will use a trick that will help block updates temporarily. To do so, follow the steps below:

1. Head to Windows Settings.

2. Look for Network & Internet and double click it.

 

windows 10 update undoing changes made to your computer

 

3. Click Status in the right pane > Change connection properties in the left.

 

windows 10 undoing changes

 

4. Look for the Metered connection option and toggle it to the right to enable a Metered connection.

 

we couldn t complete the updates

 

This will block updates from being downloaded temporarily as a data limit will be set.

After a while when Microsoft releases bug-free updates, disable it and get the latest Windows update

7. Rename the SoftwareDistribution folder

To store temporary Windows installation files, the SoftwareDistribution folder is used. If any file gets corrupt during installation, you might end up facing Windows 10 undoing changes error messages. Therefore, to fix it, let’s try renaming the folder in question. To do so, follow the steps below:

1.  Windows search > Command Prompt > Run as administrator
2.  Here, type the following command. Make sure you press enter after every command.

net stop wuauserv
net stop bits
rename C:\Windows\SoftwareDistribution\ to SoftwareDistribution.bak
net start wuauserv
net start bits

3.  Now try updating Windows you should not face any problem.

8. Enable the App Readiness service

Amongst all the methods listed above, this one is the most recent once. To enable App Readiness service, follow the steps below:

1. Press Windows + R keys.

2. Here enter services.msc

3. Under Services windows look for App Readiness service > right-click Start.

windows 10 undoing changes

 

4. Restart your system and check if the PC error message is resolved or not.

This is all for now. Using any of the fixes above you can get rid of the dreaded Windows 10 undoing changes made to your computer error message. In addition to this, we suggest using Advanced System Optimizer – the free system optimizer tool that helps clean PC and keep it free from junk files. Moreover, this tool fixes most of the issues like outdated drivers, invalid registry, and more all of which are responsible for the Blue Screen of Death.

Click the Download button to get this amazing tool and share your experience with us in the comments section below.

17 COMMENTS

  • comment_avtar
    Chris Smith
    All the tips are compiled and described thoroughly…. I wish I never need to use them but if needed, I know these steps will work for sure!

    4 years ago
    • comment_avtar
      Preeti Seth
      Hello Chris, Thank you for sharing your feedback. We appreciate you writing to us.

      4 years ago
  • comment_avtar
    john black
    The windows update troubleshooter doesn’t work. Still get the same error.

    4 years ago
    • comment_avtar
      Preeti Seth
      Hello John Sorry to hear that you are still facing the problem. As Windows troubleshooter is not working for you, try running SFC scan, DISM command, temporarily block Windows Update and try other fixes. Hope this will help troubleshoot the problem.

      4 years ago
  • comment_avtar
    Teresa
    When I get to startup settings, there is no way for me to click on safe mode. I have black screen with the “undoing” in a constant loop. If I open using F11, I get to the blue screen and can get to the start up settings, but can’t click on anything. Says “restart to change options such as:” but if I restart I go back to the loop of “undoing”, and restarting with F11 brings me to the same problem. HELP! I can’t do a rollback nor can I do a restore system – that tells me I have no previous point to go back to.

    4 years ago
    • comment_avtar
      Preeti Seth
      Hello Teresa, I would like to know if you are able to boot in safe mode or not. IF not I request you to try and follow the steps mentioned in this article https://wethegeek.com/how-to-boot-into-windows-10-safe-mode/ and boot in Safe Mode. Then try to follow the steps you should not face any problem.

      4 years ago
  • comment_avtar
    sam
    rename c:windowsSoftwareDistribution SoftwareDistribution.bak this line needs 2 slashes

    3 years ago
    • comment_avtar
      Preeti Seth
      Hello Sam, Thank you for your feedback. We have updated the post.

      3 years ago
  • comment_avtar
    Raheemah
    Please how do we proceed to safe mode if our function key is not working? Your reply would be very much appreciated.

    3 years ago
    • comment_avtar
      Krishan Vijay
      please use an external/another keyboard (If your system is unable to start)

      3 years ago
  • comment_avtar
    Julius dominic Tamparong Muyano
    The hold shift +f8 is not functioning even f8. Its always restarting after the undoing changes your computer. Can u please help me any solution

    3 years ago
    • comment_avtar
      Krishan Vijay
      Hello, we would suggest you to give it some time as in case of system restarting in loop, giving more commands will only increase the time period of boot. We hope this helps. Thank you

      3 years ago
  • comment_avtar
    Katya
    Booting Windows into Safe Mode Press “Windows Key + R” and the “Run” window will open. In the text box, write “msconfig” and press Enter or OK and the MsConfig window will open Click the “Boot” tab and check “Safe boot” Apply, and then OK. Restarting your computer will enter Safe mode.

    3 years ago
    • comment_avtar
      Mridula Nimawat
      Thank you for the information.

      3 years ago
  • comment_avtar
    aliff
    if i didn’t have a dvd or usb how can i finished the task in step 3 (sorry for my grammar) (can you reply as soon as possible)

    3 years ago
    • comment_avtar
      Mridula Nimawat
      Thank you for responding, but you will require the external storage for completing the process.

      3 years ago
  • comment_avtar
    Pravin d
    After start laptop showing massage updoing changes made to your computer and scaning only .unable to oprate any command .

    3 years ago

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe Now & Never Miss The Latest Tech Updates!

Enter your e-mail address and click the Subscribe button to receive great content and coupon codes for amazing discounts.

Don't Miss Out. Complete the subscription Now.